What Is The Difference Between YB Series Ceramic Plunger Pump And Traditional Pump?

YB series ceramic hydraulic plunger pump is driven by hydraulic pressure, using a ceramic alumina plunger and combined sealing method.

The pump body and pump cover of the ceramic pump are made of acid-resistant ceramics, which have super strong corrosion resistance and wear resistance.

The ceramic plunger adopts modern engineering ceramic materials with super hard wear resistance and can be assembled and formed using ceramic metalization bonding, welding, inlay, and sleeve connection technology.

It is an ideal substitute for similar metal pumps and has been widely used in industries such as pharmaceutical equipment, environmental engineering, petroleum, and chemical engineering.

1. Grouting pump
Grouting pump is a type of machine driven or hydraulic driven screw that rotates at high speed to suck liquid in from the suction port and then discharge it under pressure. Suitable for high viscosity slurries, such as cement slurry, mortar, and other media.

2. Screw pump
Screw pump is a type of positive displacement rotary pump that is driven by electric or mechanical means to suck liquid in from the suction port and then discharge it under pressure, thereby achieving fluid transport. Suitable for liquids with partial viscosity, including oils, solvents, chemicals, etc.

3. Centrifugal pump
Centrifugal pump is a type of pump that uses the centrifugal force generated by the rotation of an impeller to transport liquids. By rotating the impeller, the liquid is sucked in from the suction port and then pushed to the outlet by centrifugal force. Commonly used for cleaning, liquids that do not contain large particles or long fibers.

Ceramic plunger pumps are 70% more energy-efficient than traditional mud pumps.

1. Energy saving: The ceramic plunger pump motor has a power of 22KW, replacing the slurry pump with 132KW, saving 70% energy. The 22KW motor consumes 1-10 kWh of electricity per hour, saving over 10000 yuan in electricity bills annually.

2. Pressure: The pressure can be adjusted freely within the range of 0-20 kilograms.

3. Consistency of the conveying medium: It can transport high concentration suspended slurry, with solid particles smaller than 2mm and a smaller proportion of larger particles passing through. The solid content in liquid can reach up to 70%.

4. Low maintenance cost: Compared to other pumps, slurry pumps and screw pumps have a usage cost of only 10%. Only valve plates and rubber seals need to be replaced each time, resulting in lower annual maintenance costs.

5. Corrosion resistance: 304 stainless steel material is used for weak acid and weak alkali, 316 stainless steel material is used for strong acid and strong alkali, and the hardness of the alumina ceramic plunger is 8.6 or above. There is no need to worry about the wear resistance of the pump body within 15 years.