The trowel is also called the receiver.
Its main structure is a spatula rotor driven by a gasoline engine, and a spatula is installed on the bottom of the cross in the middle of the rotor. The inclination direction of the spatula is consistent with the rotation direction of the rotor, and the V-belt is driven by the gasoline engine to rotate the spatula rotor.
When operating, first set on fire and hold the control handle. When the two push forward together, they move forward, and when they pull backward together, they move backward. It can do 100-300m2 per hour on average, which can improve work efficiency by more than 30 times compared with manual troweling. It is widely used in the construction of urban roads. As for how to use it, the trowel manufacturer will give you a detailed introduction through the following article.
1. Start the trowel and operate the handle
2. Hold the joystick tightly to keep the body balanced
3. When the trowel is working, be sure to stabilize the trowel, and adjust the direction in time when working on the floor to prevent the machine from losing control
4. First rough grinding, then fine grinding. After the bottom grinding disc is coarsely ground, wait for the ground