After using the diamond wire saw cutting machine for a long time, we often need to maintain and maintain the wire saw machine accordingly. What are the common maintenance items? Let’s understand together:
1. Check the cables frequently. If they are damaged, they must be bandaged or replaced immediately to prevent leakage.
2. Regularly clean the water and dust on the electric control box, the body and the operation table to keep the equipment clean.
3. Keep the inside of the diamond wire saw cutting machine control box dry. If it is not used for a long time, it should be dried before reuse.
4. Check whether the heat dissipation cover of the main motor is normal before starting to prevent the main motor from affecting heat dissipation.
5. When performing sawing operations, attention should be paid to the waterproofing of the main motor's heat sink to prevent the cooling water from entering the main motor through the heat sink and causing a short circuit.
6. The operator must fill the lubrication points of the diamond wire saw cutting machine with lubricating oil every day.
7. Frequently clean the guide rail and the feed roller in the middle and apply grease to prevent corrosion.
8. Frequently check whether the polyurethane inserts of the drive flywheel and guide wheel are normal. If there is a large wear, replace it in time, otherwise the beaded rope will wear abnormally.
9. After each sawing operation, the dirt on the equipment should be cleaned up in time, and the equipment should be cleaned once a week to prevent dirt and corrosion of the equipment.
10. Be careful when moving the console, and do not pull the cable forcibly. The console should be placed in a rainproof place.
11. The equipment is recommended to be used within the temperature range of 0°~35°.
12. Overhaul the diamond wire saw cutting machine once a year.