Description:
The excavator-mounted rock splitter can be mounted from a crane or a normal excavator for open pits or shafts or mounted on a specialized carrier for horizontal tunneling. After the output pressure of the excavator is increased by the supercharger, the driving oil cylinder generates driving force, and the hydraulic oil is transported to the oil cylinder pipe in the airborne splitting machine through the excavator, and the ultra-huge rock splitter of the splitting machine controlled to push and expand, generate the splitting force on the object.
Technical Parameter:
| Model | Split Block Length mm |
Drilling Depth mm |
Pressure MPa |
Disruptive Force T |
Crack width |
Weight kg |
| ZT220-P90 | 800-900 | 1300mm | 24-25 | 3300- 3600 |
30-25 | 600 |
| ZT260-P100 | 950-1000 | 1700mm | 24-25 | 4400- 5200 |
30-25 | 650 |
| ZTN50-P100 | 1000-1200 | 2100mm | 24-25 | 6000 | 30-25 | 730 |
If you want to learn more details about this machine, please contact :
Email: Jenny@ztmineequipment.com
Whatsapp:+8613201801998
Advantages:
1. The rock splitter is used for earthwork projects that cannot be blasted, have high output, and have tight construction schedules. The diameter of the rock-splitting machine has reached more than 24 centimeters, and the drilling interval is 3-5 meters in a row. The excavator is lifted.
2. Put it in a cave, it can expand and split about 50 cubic meters of stone in about two minutes, and easily break thousands of cubic meters of rock in one day, which is more than ten times faster than using a gun hammer to cutting machine or expansion and crushing agent, and the cost is low.
3. The advantage of using a cutting machine is that one can be more efficient than ten, reducing water and electricity costs, improving noise and pollution, and reducing construction costs in advance.
4. The better effect, easier to crush and disintegrate, immediate effect, no need to wait, uninterrupted repeated operation, not affected by rain and temperature, no spray and strong alkali hazards, no vibration, safe and environmentally friendly.
Notice:
For your better use of our ultra-large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:
1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division;
(Hole depth requirements: splitter front end of the block length + 900mm or more, for example, split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)
2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter;
3. Do not use the splitter gun as a crowbar to use.
Hot Tags: Excavator Mounted Rock Splitter, manufacturers, suppliers, factory, wholesale, buy, cheap, low price