China Ultra-large rock splitters manufacturers|used for a large area of rock split construction
Product description of Super Wedge Rock Splitters:
Explosives or large rock breakers are the normal methods for excavation of hard rock. But restrictions on blasting are getting stricter and the use of rock breakers is not always feasible due to vibrations, noise restrictions, or simply hard rock. Ultra-large rock splitters offer an alternative method for efficient excavation of large volumes of hard rock without the need for explosives, vibrations, or fly rock. The splitter can be mounted from a crane or a normal excavator for open pits or shafts or mounted on a specialized carrier for horizontal tunneling. For large volumes of rock, there is simply no mechanical method more efficient, safe, and silent than the Yamamoto rock splitter.
Super Wedge Rock Splitters in use Note:
For your better use of our Super Wedge Rock Splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:
1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.
(Hole depth requirements: splitter front end of the block length + 900mm or more, for example, split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)
2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.
3. Do not use the splitter gun as a crowbar to use!
Hot Tags: Super Wedge Rock Splitters, manufacturers, suppliers, factory, wholesale, buy, cheap, low price