Description:
The Mortar Plastering Machine With Continuous Mixer has the same function as the original type of sprayer, adding the cylinder mixer composed of the mixing barrel and the inner curved blade, which can produce a strong radial and axial flow, with larger displacement and circulating flow. The contact area of mixed parts increased, and the size of the slurry micrometer was reduced so that the stirring effect is remarkable. It is built with a module structure inside, and stirrer and mortar spraying machines are easy to take apart, also easy to deliver. A pressure-sealed outlet could ensure that no leakage slurry. It is suitable for mixing all types of ready-mixed mortar and field-mixing mortar.
Technical Parameter:
Capacity | 3m³/H |
Motor power | 7KW |
Diameter of sand | ≦5mm |
Diameter of the feeding pipe | 32MM |
Vertical spraying distance | 20M |
Horizontal spraying distance | 30M |
Hopper volume | 50L |
Dimension | 1900*700*1150 |
Weight | 400KG |
water: cement: sand | 1:01:03 |
Voltage | 380V (can be customized) |
Feature:
1 To adapt to spray materials: putty powder, paint, latex paint, real stone paint, cement mortar, dry mortar, insulation mortar, waterproof material, fire protection materials, insulation materials, sound-absorbing materials, and other water-soluble materials.
2. Adjust the flow rate to bring out the spray effect.
3. In addition to the electric control box can be switched, but also equipped with a remote control spray.
4. The connection between the nozzle and the feed tube can be rotated for easy operation.
5. High construction efficiency and good quality.
6. Small and exquisite, easy to carry on the scene, and the accessories cost is low, the maintenance is simple.
7. Easy to use, fast, save materials, save labor, save money, only one machine is equipped with three people, 150 square meters/hour (thickness 2cm).
8. Material ratio (cement) 1:3 mortar.
Maintenance after Operating:
1. Grouting hose, air duct, nozzle cleaning inspection
2. Equipment cleaning and inspection
3. Air compressor. Cut off the power supply, and air source, close all valves, and check all parts.
4. Cut off the power supply of the electrical part and check all parts.
5. Remove booster nails and rotors, clean, and reassemble.
6. Other problems found during operation, cleaning, maintenance, etc.
Hot Tags: Mortar Plastering Machine With Continuous Mixer, manufacturers, suppliers, factory, wholesale, buy, cheap, low price