Features:

1. Concrete Shotcrete Spraying Machine with advanced technology, stable performance, reliable operation, and simple operation. It is a kind of conveying grouting equipment with reliable quality in China;

2. Mainly used for building interior and exterior walls, cement mortar spraying, and external wall insulation materials mortar spraying, refractory spraying.

3. The mortar spraying machine basically has no floor ash, saves water, and saves materials, which can greatly reduce the cost;

4. The operation is simple, no need to take scaffolding, no mobile equipment, no need to repair the raft, the yin and yang angle, the top plate can be freely sprayed, with the advantages of high speed, high efficiency, and low labor Intensity.

5. A sprayer can easily spray 200 square meters per hour.

concrete cement mortar sprayer

Technical Parameter:

Capacity	3m3/H
Motor power	7KW
Diameter of sand	≤5mm
Diameter of feeling pipe	32mm
Vertical spraying distance	20m
Horizontal spraying distance	30m
Hopper volume	50L
Dimension	19007001150
Weight	400kg
Water:cement: sand	1:01:03
Voltage	380v

Contact information:

Summer

Mobile/Wechat/Whatsapp: +86 13571973823

Email: summer@ztmineequipment.com

How to use Spraying Machine:

1. Spraying, feeding the mortar machine, adjusting the consistency of the appropriate mortar, and spraying, the thickness of the spraying should be slightly higher than the standard rib of about 1 mm. The specific requirements are: when spraying, the hand should be sprayed according to the condition of the rib, according to the leveling of the wall Try to achieve uniform leveling; guide the spray gun to move back and forth in the horizontal direction at a constant speed and do not spray the circumference; when spraying the wall plaster, be sure to make the spray gun slightly upward, otherwise it will always be sprayed on the wall at right angles. The distance between the nozzle and the wall should be 10~30 cm.

2, smoothing, after the mortar is sprayed, it is necessary to immediately smooth the construction, use a large scraper to smooth the bottom of the ribs from the bottom, and use the scraped material to fill the depression, try to achieve a soothing. If the mortar is too thin, it is not suitable for smoothing immediately. After the mortar is slightly hard, check the flatness of the wall with a 2-meter ruler. Slightly scrape off, slightly lower need to find the fill, and use a small foam board to flatten.

3, calendering, calendering time should be mastered, the mortar is pressed by hand, and the pressure is best when the finger is no longer sticky, use the foam board to dip the water slurry, smooth the iron trowel into the calendar until the surface is relatively smooth.

WeChat/whatsapp:+8613571973823

Fax:+86 02962322708

E-mail:summer@ztmineequipment.com

Hot Tags: Concrete Shotcrete Spraying Machine Used in Tunnel, manufacturers, suppliers, factory, wholesale, buy, cheap, low price