Contact:
Summer Zhu
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Description of hydraulic grouting pump:
Hydraulic grouting pump is suitable for grouting and water blocking, filling voids, reinforcing broken rock formations, etc. in mines, tunnels, water conservancy, subways, buildings, bridges, and other construction sites.
Parameters of hydraulic grouting pump:
Contact:
Summer Zhu
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Operating remark:
1. Before each shift, first press the hand oil pump several times to fill the transmission part.
2. After turning on the power, first start the main motor, and check whether the rubber conveying spiral rotation direction is consistent with the direction indicated by the arrow. If it is inconsistent, replace the power phase line. Note that this check is performed each time the power is turned back on.
3. Connect the hose and nozzle. Add 5 liters of clean water to the hopper, start the motor and pump out the water to wet the hopper, pump body, and conveying hose. After pumping most of the water out, you can stop it.
4. Add the proportioned mortar (or paint) to the hopper, start the air compressor and the damper, and start spraying.
5. After the work is finished, immediately drain the remaining material in the hopper, inject enough water into the hopper to thoroughly clean the hopper, and then pump it out to clean the hose and the nozzle until the pump is full of clean water. Only after the cleaning is over. In order to avoid the residual material condensing in the hopper, hose, and nozzle, plugging the hose and the nozzle, affecting the service life of the equipment.
Contact:
Summer Zhu
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Hot Tags: dual liquid cement grouting pump|hydraulic, manufacturers, suppliers, factory, wholesale, buy, cheap, low price