The hydraulic pile cutter/pile breaker provides pressure to multiple cylinders of the pile cutter through the power source, and the cylinders directly drive the drill rod, and at the same time squeeze the pile back to make the pile head pick up and remove. During the construction of the pile cutter, it has simple operation, high efficiency, low noise and low cost, and is suitable for pile group construction projects. The pile cutter adopts a highly modular combination, and the modules are connected by pin shafts, and the pile heads within a certain range of diameter can be cut through the combination of different modules.
Performance characteristics of the Hydraulic Pile Breaker
1. Simple
Modular structure, simple installation, equipped with different numbers of modules according to pile diameter
2. Universal
The hydraulic pile cutter can use the power of the excavator or the power of the hydraulic station
3. Environmental protection
Fully hydraulic drive, low noise, static pressure construction, does not affect the quality of the pile
4. Low personnel cost
It is mainly operated by one operator of the excavator, and another supervisor can be equipped
5. Safety
The constructor is the driver of the excavator and does not directly touch the broken pile
The hydraulic pile breaker is composed of modules, and the pile is broken by adding or removing modules according to the diameter of the pile.
Installed at the front end of an excavator or crane, using the power of the excavator or hydraulic station to break the piles, mainly to destroy the solid cast-in-place piles and solid precast piles.