Knowledge

What are the types of rock splitting?

May 10, 2024 Leave a message

Types of rock splitting machines

1.Handheld splitting machine & stick

1. There is no vibration, no impact, no noise, and no dust during the dividing process, and the dividing is completed within seconds.
2. The maximum slitting force of a single machine can reach 480 tons, with high efficiency, control of slitting, disassembly, and slitting dimensional accuracy.
3. Light weight, simple to operate, easy to maintain, can be carried out indoors, and can be used for underwater construction in narrow spaces.

 

2.High frequency vibrating hammer

When the high-frequency breaker hammer breaks rocks, it uses the cracks between the rocks to carry out high-frequency strikes, so that the cracks become larger and larger under the action of high frequency, making it unable to form a resultant force and being separated from the original combination and falling off. Cracks will occur on the entire rock surface when vibrating at high frequencies. As long as the impact rock is vibrated within 50cm, its periphery will fall off quickly. During crushing, the bucket teeth must have an internal angle less than 90 degrees. When vibrating, the excavator should constantly adjust the internal angle for crushing.

 

3.Airborne splitting machine

Hydraulic equipment can be installed on the excavator and can be driven by pressure. The hydraulic diverter of the excavator is unloaded, cleaning the ground and rocks between the roadbed stones and the rock and soil of the excavator, allowing the drilling equipment to increase the intercept on the rock surface, and the large air compressor selects the intercept to make the direction or position of the layered rock drilling Larger drilled holes are porous, with a height of 1.5-2.5 meters, and a distance between two holes of 1.5-2.5 meters. The extra large rock splitter tool has a crack width of 4-6cm

 

4.Piston rock splitting

The piston rock crusher mainly consists of two parts: a high hydraulic pump station and a splitting rod. The output of the 140-180MPa ultra-high pressure oil pump station acts on the wall of the splitting body, and the rock splits along the predetermined direction at (1600t).

 

5.Concrete pile breaker/pile cutter

The pile cutter | pile breaker uses a power source to provide pressure to multiple oil cylinders of the pile cutter. The oil cylinders directly drive the drill rod and simultaneously squeeze the pile body to cut off the pile head. During the construction process of the pile cutting machine, the operation is simple, high efficiency, low noise and low cost, and it is suitable for pile group construction projects. The pile cutting machine adopts a highly modular combination. Through the pin shaft connection module, it can cut off pile heads with a certain diameter within a certain range through different combinations of module numbers.

Send Inquiry