The type of scabbler
The floor scabbler machine is divided into hand-held, hand-pushing, walk-behind, airborne and other operation modes, which are selected according to different engineering projects, such as the ground hand-pushing walking machine; Frequency and corresponding chiseling force are convenient for operation.
The scabbler is used in highway and railway, bridge, tunnel, water conservancy and hydropower reinforcement and reinforcement, building reinforcement, decoration, municipal road and bridge repair and reinforcement, airport, parking lot, etc.
Small pneumatic scabbler Multi-head electric scabbler Model parameters:
Machine model One head Two heads Three heads
Weight 2.1KG 3.2KG 5.2K
Length 420mm 420mm 420mm
Height 1260mm 1260mm 1260mm
Width 320mm 380mm 560mm
Working width 31mm 69mm 100mm
Vibration level average equivalent 0.96 square meters / second 0.96 square meters / second 0.96 square meters / second
Matching requirements of air compressor: pressure is 5 kg / cm2, displacement is 0.8 m3 / min
Concrete electric hair scabbler
The wool scabbler is used for waterproofing the bridge surface.
The pneumatic scabbler is used for waterproofing the beam surface of the box beam (prefabricated beam) of high-speed railway.
Concrete scabbler is used for cutting concrete on bridge side, bridge end face, beam side and beam end face.
Pavement scabbler is used to remove ground coating, paint and various traffic markings.
Pneumatic scabbler is used to clean and remove airport road markings, runway tire braking marks, etc., to regain rough surface with high friction coefficient.
Small scabbler is used for surface treatment of cement asphalt pavement, highway bridge deck, bridge stagger, epoxy resin wear-resistant ground and so on.
The hand-held scabbler is used for the construction of the micro-surface of the road.
Contact: summer@ztmineequipment.com