Product description:
Pneumatic drill is a drilling equipment which uses compressed air as power source.
The compressed air enters the pneumatic motor of the drill through the pipeline, drives the motor to rotate, and then drives the impactor and drill bit to impact and rotate. The high frequency impact force produced by the impactor breaks up the rock, while the rotary cutting action of the bit drains the broken rock debris out of the hole.
Products use:
Portable DTH Drill Widely applicable to the mining, water conservancy, highway, construction, blasting, and other projects, the host can be directly water injection operations, blast hole drilling machine particularly suitable for drilling when the soil tunneling, can replace ordinary stones.
Product parameters:
|
model |
Q-100 |
|
Voltage |
380V |
|
Air pressure |
0.6-0.8mpa |
|
Drilling diameter |
65-130mm |
|
Motor Power |
4.0kw |
|
Drilling direction |
0°-90° |
|
Hose Diameter |
38mm |
|
Drilling depth |
≥30m |
|
Cylinder advance stroke |
1000 |
If you want to learn more details about this machine, please contact :
Email: Jenny@ztmineequipment.com
Whatsapp:+8613201801998
Application of Q100 Pneumatic DTH Drilling Rig
Mine mining: Used for drilling and blasting operations in mines to provide blasting holes for ore mining.
1. Tunnel engineering: In the tunnel construction, the construction of geological prediction drilling, anchor hole, grouting hole, etc.
2. Hydraulic engineering: used in hydraulic engineering dam foundation consolidation grouting holes, curtain grouting holes and other drilling operations.
3. Construction engineering: In the building foundation engineering, the construction of cast-in-place piles, bolt holes, etc.
In short, the pneumatic drilling rig with its strong power, simple structure, wide adaptability and other characteristics, plays an important role in the fields of mining, tunnel, water conservancy, construction and so on.
Q100 Pneumatic DTH Drilling Rig Note:
Opening, the first start of the motor, to be transferred after the normal operation of the handle to pull the handle. So that it gets the appropriate propulsion, and then pulls the handle to control the impactor to the working position. After drilling, you can open the water valve, so that the gas and water mixture maintains a proper ratio. The normal Electric DTH Drill work. When the pushing work moves the lever to contact with the holder, a drill pipe is drilled. To stop the motor from running and stop the blower to send air, water, the fork is inserted into the drill holder drill groove, the motor reverses slide back so that the joint and the drill pipe are disconnected, then the second drill pipe, press Here you cycle to work continuously.
Hot Tags: electric DTH drill| 15-meter depth electric driven DTH drill rock drill machine, manufacturers, suppliers, factory, wholesale, buy, cheap, low price