Hand-push concrete milling machine
Concrete Scarifiers tackle the most demanding surface preparation and material removal applications. Ideal for the removal of coatings and corrosion from steel and concrete surfaces to prepare for re-coating. Produce an ideal keyed or grooved profile on concrete for waterproofing and non-slip surface applications.
Parameters of Hand-push concrete milling machine:
Power configuration | Three-phase asynchronous motor/5.5KW（CW200D） Honda GX270 Gasoline Engine/13HP（WC200F） | Three-phase asynchronous motor/7.5KW（CW255D） Honda GX270 Gasoline Engine/13HP（WC255F） |
Number of knife shafts | 6root | 6root |
Number of blades | 78 pieces(6 teeth) | 108pieces(6 teeth) |
Bearing seal form | Sealed(maintenance-free) | Sealed(maintenance-free) |
Milling width | 200mm | 250mm |
Milling depth | 3mm-5mm | 3mm-5mm |
Weight | 90kg | 115kg |
Length*Width*High | 1125*500*1125mm | 1125*500*1125mm |
Hourly work efficiency | 150 square meters | 170 square meters |
Walking wheel | 4only | 4only |
Air damping tube | 2only | 2only |
Application of the hand-push concrete milling machine:
1. Remove the ground coating and paint various traffic markings; when the ground is damaged or dirty and needs renovation, remove the old floor surface, etc.
2. Clear airport road markings, runway tire brake marks, etc., and regain a rough surface with high friction coefficient
3. Milling and leveling the over-elevated parts of cement asphalt pavement, highway bridge deck, bridge staggered platform, and epoxy wear-resistant ground
4. At the micro-surface construction of the road, the old pavement layers should be milled and removed to prepare for the slurry seal.
Hot Tags: Hand-push Concrete Milling Machine, manufacturers, suppliers, factory, wholesale, buy, cheap, low price