Contact information:
Summer
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Breaking reinforced concrete:
The controlled forces of the hydraulic concrete splitter are very effective in breaking reinforced concrete. This method requires both concrete and concrete. This method requires that both the concrete and the concrete bond on the rod be broken in one operation. The drawing shows a typical rod pattern in the concrete.
First, a hole is drilled between the rods. The splitter is placed into the hole and positioned(by rotating) so the braking force will be at a 45-degree angle. (heavy arrow with a hole shows the direction of force). As the concrete breaks at an angle, it moves across the rod both vertically and horizontally. This procedure is repeated each time. The spacing for holes is approximately every two feet on the horizontal, and 18 inches vertically. The 45-degree breaking angle was issued in all holes. If the hole pattern is too far apart, the bond of the concrete to the rod will not break.
Moving the concrete 1/2 inch apart enables the workmen to remove the broken concrete with light chipping hammers or a small pinch bar.
Heavy walls and slabs can be prespilt and removed with large impact tools. splitting reduces the time of impact tool operation. Great savings can be realized by using the splitting method.
If the concrete is very heavily reinforced, the hole spacing of under 2 is recommended.
Contact information:
Summer
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Hot Tags: how to use the concrete splitter with breaking reinforced concrete, manufacturers, suppliers, factory, wholesale, buy, cheap, low price