Contact:
Summer Zhu
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Uses and characteristics of Prestressed Concrete Strand Pusher Machine:
This machine can enter and retreat. It integrates wire pay-off and threading. It is small in size, light in weight, simple in operation and convenient in maintenance. During construction, two people can complete the operation, which greatly reduces labor intensity and improves production efficiency.
Working principle of Prestressed Concrete Strand Pusher Machine:
The reducer drives the double driving wheel to rotate, and the steel hinged wire is inserted from one end of the wire inlet. The driving wheel and the double-cluster movable wheel press the steel hinged wire and move forward along the duct and penetrate the reserved hole until it passes through the other end of the hole to reach tension Use size.
Precautions
1) Operators at both ends should cooperate closely, especially when the operator at the inlet end is cutting the steel strand or putting on the guide cap, the operator at the outlet end should not put his hand on the control button to prevent accidental operation and injury.
2) When working, people should be prohibited from passing through at both ends to prevent the steel strand from popping out and hurting people.
3) When the pressure roller slips during work and the steel strand does not advance, the machine should be stopped immediately to avoid excessive wear of the steel strand and pressure roller. The work can only be continued after the cause has been identified and resolved.
4) There is a forced interlock emergency stop design for the cutting machine and the main motor in the circuit diagram, which the user can choose to use.
Maintenance of Prestressed Concrete Strand Pusher Machine:
1. Regularly check the degree of wear of the lubricating oil and the pressure roller in the strand threading machine. When the pressure roller is not adjusted to the use level, it should be replaced in time.
2. After each use, the strand threading machine should be placed in a dry and rain-free environment.
For more specification information, please contact us.
Zhongtuo provide high quality and cost effective Prestressed Concrete Strand Pusher Machine.
Common faults of the transmission system of Prestressed Concrete Strand Pusher Machine:
The common faults of the transmission system of the strand piercing machine mainly include:insufficient output power, difficult starting, slow gear shift response; excessive oil temperature and hydraulic torque converter not working. Failure analysis: during use, if it is found that the power of the strand piercing machine is insufficient, the climbing is difficult, the shift response is slow, and the load lifting is working normally, first use the pressure gauge to detect the system pressure, if the specified pressure value is not reached , The reason may be: excessive wear of the gear and pump body of the compensation pump, excessive wear of the gear and pump body of the compensation pump, and increase of leakage in the compensation pump; poor cleanliness of the oil causes the oil circuit to be blocked and the compensation suction.
Contact:
Summer Zhu
Mobile/Wechat/Whatsapp: +86 13571973823
Email: summer@ztmineequipment.com
Hot Tags: Prestressed Concrete Strand Pusher Machine, manufacturers, suppliers, factory, wholesale, buy, cheap, low price