Automatic Rebar Spiral Bending Machine 6-14mm

1. Automatic rebar spiral bending machine adopts integrated control of single-chip microcomputer, and it can be adjusted arbitrarily
2. Part adopts the imported devices to ensure the service life of the machine. The meter error is very small with the encoder, and it is accurately positioned.
3. By setting the inner diameter and interval, different types of spiral tendons and steel springs can be customized according to customer requirements.
4. This machine is a box-type structure, the rigidity is good, and the hydraulic transmission part is flexible and reliable. 5. Control box is equipped with fast feeding, automatic cutting, manual cutting, and automatic control. Stop, start, and other functions

Spiral bar forming machine is mainly used in the construction of high-speed railways, elevated bridges, and pipe piles. It can be rolled, spring-type spiral bars, and other specifications of pre-stressed anchors.

spiral bending machine-1a.jpg Automatic rebar spiral bending machine-2a.jpg

The circle of 10-1000mm can be processed at one time by an Automatic Rebar Spiral Bending Machine of 6-14mm.

Helical rib molding Automatic Rebar Spiral Bending Machine 6-14mm advantages:
1. The spiral bar forming machine adopts a microcomputer fully automatic PLC coding numerical control system. The user only needs to input the spiral bar spacing and the number of meters on the numerical control code display, and the cutting length error is within 5mm, and the spiral bar can be automatically processed and cut.

2. The purpose of the steel bar spiral bar forming machine is to provide a semi-automatic flat spiral bar winding machine with a rotary forming structure, which is convenient and quick to wind a flat workpiece into a spiral bar, saving time and labor, and has high processing efficiency.

Product parameters of Automatic Rebar Spiral Bending Machine 6-14mm:

Model	YGW-10	YGW-12	YGW-16	YGW-22
Applicable steel bar diameter	4-10	8-12	10-16	16-22
Total motor power	5.5KW	7.5KW	11.5KW	16KW

Speed of travel	20-40m/min
Cut off the form	Automatic hydraulic cut-off
Bend diameter	100-1000mm

Standard sizes (mm)	15008001500	200010001700	220010001700	260010001800
Weight	700KGS	900KGS	1000KGS	1300KGS

Automatic rebar spiral bending machine-3a.jpg

1. Compared with a single hoop, each circle of spiral stirrup has two 135-degree hooks, which can save a lot of raw steel material when calculated together.
2. Spiral stirrup is a material that can be bent continuously to replace multiple single hoops, the number of roots and times that can be cut, and the number of formed bends, which can automatically prop up the skeleton for easy positioning during tying, because there are not many 135 degrees The hooking of the open hook can speed up the lashing speed and lashing efficiency, shorten the lashing operation time, and can save a lot of working hours and labor.
3. Spiral stirrup is a continuous integral steel component. The steel frame formed by the screw hoops is tightly combined with many triangles, and its performance is outstanding. It is firm and strong. The prefabricated lashing frame is in the lifting and transportation, and the finished screw is in the concrete pouring. , Both can ensure that the finished steel bar will withstand disturbance, collision, and trampling without distortion or deformation. A spiral bar is one of the four sets of finish-rolled rebar anchors. It is mainly used for pre-tensioned and post-tensioned pre-stressed box girders and large building roof trusses, ground anchors, bridges, slope protection, etc., correctly placing the refined-rolled rebar spiral bar , Is essential for the control of engineering construction.

Hot Tags: Automatic Rebar Spiral Bending Machine 6-14mm, manufacturers, suppliers, factory, wholesale, buy, cheap, low price