Contact:

Contact: summer@ztmineequipment.com

Mobile/Wechat/Whatsapp: +86 13571973823

Product description

The Remote Control Solar Panel Cleaning Machine is an intelligent fixed cleaning robot, mainly for large and medium-sized photovoltaic power plant module cleaning installation dry hanging on the photovoltaic module, you can automatically clean. Sweep.
The robot has two control modes: automatic and manual. The manual mode supports remote control. The waterless cleaning technology relies on high-speed rotation of rolling brush to complete the cleaning, which is suitable for the cleaning work of most pollutants.
The Remote Control Solar Panel Cleaning Machine can work alone or collaboratively over a 4G network. Managers can remotely command and control multiple robots through software, and the working situation and failure of the robot can also be transmitted back to the manager through the wireless network, which is convenient for remote management and control.

The four walking wheels of Remote Control Solar Panel Cleaning Machinewalk along the assembly frame, and the top auxiliary wheel of the multi-row panel model rotates synchronously. The brush steering of the cleaning part is opposite to the traveling direction of the walking wheel. In the process of the brush rotation, the dust is first brushed off from the surface of the assembly, and then the dust is driven to the gap of the assembly by the impact of the brush and the rotating air flow. And integrated spray system, vacuum system for customers to install.

Remote Control Solar Panel Cleaning Machine applies a variety of sensor technologies to sense the position of the robot, but also to sense the working state of the robot walking wheel, battery, brush, etc.

Product Parameters

summer@ztmineequipment.com

S/N	Item	Parameters	Remarks
1	Operation Method	Manual	By portable remote controller.
1	Operation Method	SCADA	Wireless remote communication via gateway and antenna. RF433MHz Modbus TCP/IP Protocol
2	Auxiliary Supporting Structures	Requiring bridges, docking & return stations.	Robot wheels run on panel frame. Module-to-module clearance is suggested within 20mm, so as to avoid installing bridge connection.
3	Cleaning Method	Dry cleaning by roller brush	Bristle material: Nylon PA6, UV-Resistant.
4	Weight	Roughly 67Kg	Depend on battery size and battery size/capacity depends on robot travelling distance.
5	Dimension	L4000±W445H455mm	Robot is customized, *L depends on panel length.
6	Voltage	DC 24V
7	Driving Mode	DC motor output driving	Two 70W wheel-driven motors. One 100W brush-driven motor.
8	Transmission Mode	Gear drive	No sprockets and chains inside robot.
9	Power Supply	200W L1580W676H40mm 11.3kg	Self-charging solar panel is placed on docking station. Short array will be equipped with 100W panel.
10	Travelling Speed	16m/min on average
11	Travelling Distance	Suggest within 2400m(Namely row length 1200m)	Depend on battery capacity.
12	Cleaning Mode	Round-trip/full-cycle cleaning
13	Brush Rotating Speed	130RPM
14	Operating Noise	Less than 60dB
15	Operating Temperature	-40℃~70℃
16	Operating Humidity	0%~95%	Robot is able to run after rain or in the rain. While in order to ensure better cleaning effect, robot is suggested to be operated when the panel is dry, or panel is wet after raining.
17	Wind Rating	26m/s, Grade 10(For normal robot operation; if robot stops its supporting structures, wind rating can be 45~47m/s.)	*Different country may have different wind rating standard.
18	IP Level	IP65
19	Cleaning Angle	0~35°	*If for tracker, robot only runs while tracker is in stow position.
20	Climbing Angle	Suggested less than 15°(Short distance like bridge climbing)
21	Cleaning Frequency	Max. once per day is suggested	Depend on site soling condition.
22	Cleaning Efficiency	≥99.5%
23	Uptime/ Availability	≥98.5%	The rest 1.5% can be rectified immediately by site O&M team within the day.
24	Environmental Effect	Environment-Friendly	No trash, no toxic and harmful matter output.
25	Standard Warranty	2 Years(From robot acceptance test date.)	For complete robot system. Within warranty period, Sol-Bright provides maintenance services along with spares.

Advantages

This Solar Panel Cleaning Machine has the following features:
● High cleaning efficiency
● High degree of intelligence
● With solar power generation, charging, storage device, self-power without external power supply, all-weather work ● strong adaptability, suitable for a variety of areas and terrain
● Automatic/manual two control modes, manual mode can be remote control
● Automatic cleaning time and frequency can be set independently according to region or season
● Automatic speed stabilization, equipment forward speed and brush motor speed match, improve the cleaning quality of waterproof, dustproof, anti-fog level
● Equipment parts standardized, easy to transport, installation, debugging, parts easy to replace

Hydraulic Stressing Jack

FAQ

1. who are we?
We are based in Xian, China, start from 2020,sell to Southeast Asia(40.00%),Domestic Market(20.00%),South Asia(10.00%),Eastern Europe(10.00%),South America(10.00%),Western Europe(5.00%),Eastern Asia(5.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
solar panel,portable solar charger,solar power system on-grid,solar system off-grid,solar plant project EPC

4. why should you buy from us not from other suppliers?
-20 Years solar panel R&D and manufacturing experiences; -Exclusive solar panel sale agent for Renesola, Tier 1 Brand; -Factory price; -24 hours fast response; -Customized design for solar panel and solar system including;

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,CIP,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C;

Hot Tags: Photovoltaic cleaning robot equipment that can efficiently clean solar panels, manufacturers, suppliers, factory, wholesale, buy, cheap, low price