Description of Hand-held floor scrabbler:
The hand-held multi-angle hair chipping machine is mainly suitable for the leakage of reservoirs and dams, the reinforcement of dangerous bridges, power plants, tunnels, highways, railway bridges, and box beam concrete surfaces.
At the same time, it is widely used in many fields such as removing, repairing, renovating, and strengthening building walls, floors, and municipal engineering concrete surfaces.
The characteristic of this machine is that it can be used for hanging chiseling and chiseling from multiple angles such as planes, elevations, arcs, etc. It has a large impact force, free chiseling depth, and a wide range of applications.
Parameters of Hand-held floor scrabbler:
Operating instruction of Hand-held floor scrabbler:
Air Supply
The compressed air must be free from water and dirt. The installation of a filter/regulator/lubricator air preparation set (with moisture trap) adjacent to the tool is strongly recommended.
Always clear the air hose before connecting to the tool. Ensure that no moisture (condensation) is present in the air hose.
Ensure that a minimum 10mm (3/8”) bore air hose is used and that all couplings are secure, leak-free, and in good condition.
Limit the length of the air hose to 10M (33ft). Where extra length is necessary, for each additional 15M (50ft) of air hose used, the pressure drop is approximately 0.16bar (3psi).
The correct operating pressure is 6.2bar (90 psi).
Do not let the operating pressure fall below 5.5bar (80p.s.i.) or rise above 6.9bar (100 psi) absolute maximum.
The compressor must be able to supply a minimum of 14.2lps (30cfm), (Free air, not displaced as quoted by some compressor manufacturers).
In particularly cold weather it is recommended that a proprietary anti-freeze lubricating oil is used.
Hot Tags: portable floor scabbler|pneumatic|multi-headed, manufacturers, suppliers, factory, wholesale, buy, cheap, low price