PC Strand Extruder Machine

1. It can push PC strand continuously.
2. It has the features of easy operation, reliable performance, efficiency significantly.
3. The machine reduces labor and is widely used for large-scale bridges and constitutive objects.
4. High performance with good quality
5. It is the main tool of through strands in building bridges and large buildings with Prestressing work.

Working principle:
The anchoring device used in prestressed concrete, is in a post-tensioned structure or component, in order to keep the tendons of tension and passes it to the interior of the concrete anchor tool, also known as Anchorage.

Anchor end extruder5 Anchor end extruder2

Application:

The prestressing machine is suitable for the connection of steel strand sleeves and is a tool for cold gripping and anchoring work. 6. When the machine is shipped from the factory, the head and the mold are coaxial. It is advisable to pass the end of the mold smoothly. If there is an offset, the mode position.

Structure:

PC strand extruder machine-03

Specification:

Parameter PC strand Extruder Machine
Item Model	Rated Extrusion Pressure	Extrusion Hydro-Cylinder	Extrusion Area of Piston	Return Area of Piston	Stroke of Extrusion	Mass	Overall Dimension
	Rated Extrusion Pressure	Extrusion Hydro-Cylinder	Extrusion Area of Piston	Return Area of Piston	Stroke of Extrusion	Mass	Overall Dimension
	KN	Mpa	mm²	mm²	mm	KG	mm
ZT500	495	63	7850	4500	150	70	760200200
ZT600	565	50	11300	49500	135	50	605195195

Preparation for the procedure:

1, pay attention. After the oil pump is started, there must be no one at both ends of the machine. Make sure that the oil pump is clear at both ends.

2, machine operation, should be operated on the side of the machine.

3. The oil is selected and selected according to the oil pump manual.

4. The machine should be operated at no load for more than 3 times before use, and the air inside the cylinder should be excluded. Into the oil. If there is crawling, run it 6 times without load. If there is still crawling, analyze the cause and use it after troubleshooting.

5. After use, reset the machine.

mailto:mary@ztmineequipment.com

Hot Tags: pc strand extruder machine, manufacturers, suppliers, factory, wholesale, buy, cheap, low price