Product description:
The Straight thread rolling machine of the steel bar is used to realize the reinforcement and thread processing of the steel bar at the time of cutting and rolling thread. It solves the problem of pretreatment of the steel bar before processing and the number of times the same equipment Into the problem so that the scene to reduce the process of processing and multiple steel handling, construction more convenient, fast, simple operation. Improve the work efficiency, shorten the duration; Straight thread rolling machine using a rolling head can be achieved on a variety of specifications of steel rolling processing, to solve the same equipment on the end of steel processing straight thread required for each type of a rolling head The Straight thread rolling machine with the inside out of the coolant to solve the rolling process chip removal problems and can achieve automatic feeding until the entire rolling process is completed automatically stop, and then automatically reverse, you can achieve automatic retreat, Automatic stop and automatic reset of the automation process.
Products Application:
DBG-40C Straight thread rolling machine is the latest research and development of the company's products, mainly for the construction of ribbed steel bar rolling straight wire thread processing, is to achieve the key connection of steel equipment, processing φ12-φ40mm HRB335-500 grade ribbed steel bar
Product parameters:
Main motor power: | 4KW 8A |
with power: three-phase | Three-phase voltage380V 50HZ |
reducer speed ratio | 17、23 shaft speed（82-48）r/min |
the diameter of processing bars: | Ф16-Ф40mm（HRB335、HRB400、500） |
the maximum processing length | 90mm |
weight | 450KG |
Use of Straight thread rolling machine operation Note:
1. Before the operation, connect the power cord and ground wire as required, and turn on the power supply. The power supply for the three-phase 380V 50Hz AC power, in order to ensure personal safety, needs to use the automatic switching function with leakage protection.
2. Cool the tank, and add enough soluble coolant (no refueling coolant). The cooling liquid must use a water-soluble emulsifying coolant, the use of oil-based coolant, not to use ordinary lubricants instead. When there is no coolant, it is forbidden to roll the thread. Turn on the power, you need to check the cooling pump work is normal. Operation button, check the electrical control system is working properly. Depending on the diameter of the bar to be Rebar Thread Cutting Machine, care should be taken to replace the rolling wheel that is compatible with the machining diameter.
3. Be sure to place the steel bar to be machined on the centering jaw. The extension length should be aligned with the end of the head of the rolling head of the starting position and then the handle clamp.
4. The ends of the bars to be machined shall be flat and must be cut with a toothless saw. And in the end of the length of 500mm range should be straight, not allowed to bend, but also not allowed to cut or cut off the machine directly cutting the end of the machine.
5. Stripping the knife cutting a certain number of steel, the blade will become blunt, this time should be stripping rib knife removed, the cutting edge of the tool grinding to 0.2-0.3mm (strictly prohibited blade top). Stripping the edge of the knife-edge can not be properly cut when the new blade should be replaced.
6. In the initial cutting should be uniform, the steel bar straight thread rolling machine does not push forward, to prevent the blade cracked. Slides and sliders should be regularly cleaned and oiled. After processing the iron filings should be cleaned up in time. General cooling liquid box half months to clean up once. The reducer should be refueled regularly to maintain the specified oil level. In addition, the rolling machines should pay attention to regular maintenance.
FAQ
1. Q: Are you a trading company or a manufacturer?
A: We are an original equipment manufacturer.
2. Q: How long is your delivery time?
A: It is according to the model and quantity.
Generally, it is 3-5 days if the machines are in stock.
It will be 15-30 days if you want to customize the machines.
3. Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer you the sample machine.
But it's not free. You need to pay for the sample and the cost of freight.
4. Q: What are your terms of payment?
A: We accept T/T, Western Union, Money Gram, Paypal, Alibaba Escrow, etc.
Payment<=USD 5000, 100% in advance.
Payment>=USD 5000, 30% T/T in advance, balance before shipment
Hot Tags: straight thread rolling machine|efficient straight thread processing sleeve connection equipment for construction, manufacturers, suppliers, factory, wholesale, buy, cheap, low price