Contact Us

  • Address: No.27,Beichen Village Industrial Park,Weiyang District,Shaanxi Province

  • Phone: +86 13279217918

  • Fax: +8602962322708

  • Mail:zhongtuoks@foxmail.com

DTH Drill

  • Pneumatic DTH Drilling Rig

    Pneumatic DTH Drilling Rig

    Advantage of Pneumatic DTH Drilling Rig:
    1. Long life span: the wear-resist of tungsten carbides is 10-20 times higher compared with other similar materials, which greatly extends the life of the carbide bits;
    2. High drilling efficiency: the high grade hardness...

  • Pneumatic Hand Held Rock Drill

    Pneumatic Hand Held Rock Drill

    Pneumatic hand held rock drill is suitable for most drilling applications in medium to hard rock.
    Pneumatic hand held rock drill is equipped with a polyurethane cover that can reduce noise by up to 50 percent.
    With its long stroke the Puma has good penetration...

  • Mining Electric DTH Drilling Rig

    Mining Electric DTH Drilling Rig

    Mining electric DTH drilling rig is applied in forepoling, piling, tunnelling, anchoring or construction
    : Mining electric DTH drilling rig is mainly used to drill rocks, stones, floor, etc. in mining and road construction, water conservancy, national defense and other...

  • Pneumatic Crawler Rock Drill Machine With Drilling Pipe Φ60×2000mm

    Pneumatic Crawler Rock Drill Machine With Drilling Pipe Φ60×2000mm

    1 low-speed high-torque hydraulic motor drive rotary device output torque required for drilling operations.
    2 with the cylinder to promote, so that more stable propulsion, failure rate than the motor propulsion significantly reduced.
    3 two-stage filter device to...

  • Mining Electric DTH Drilling Rig Worked With Air Compressor

    Mining Electric DTH Drilling Rig Worked With Air Compressor

    No noise or very low noise - only cracking level No vibration but only drilling No dust but only drilling

  • MQT-130 Pneumatic Air Hand Held Rock Drilling bolter

    MQT-130 Pneumatic Air Hand Held Rock Drilling bolter

    Introduction of MQT130 Handheld Mining Reinforced Pneumatic Jumbolter:
    1. MQT130 Handheld Mining Reinforced Pneumatic Jumbolter is widely used in roadway where the hardness of rock is greater than or equal to f10, especially for rock bolting in roadway.
    2. MQT130...

  • YT28 Pneumatic Rock Drilling Machine With Air Leg

    YT28 Pneumatic Rock Drilling Machine With Air Leg

    Advantages of hand-held / Air-leg Jack Hammer Rock drill:
    a: Reasonable design
    b: Convinient operation
    c: Fast drilling velocity
    d: Engery-saving
    e: High Efficient
    f: Long service life of parts
    g: Parts highly interchangeable and...

  • MQT130 Blast Hole Drilling Machine

    MQT130 Blast Hole Drilling Machine

    1. Small size, light weight, easy manipulation and simple maintenance.
    2. Gear type pneumatic motor, stable running, high reliability.
    3. Reinforced plastics feedleg, safe and anti-explosion, longer service life.

  • Hydraulic Anchor Drilling Rig Machine

    Hydraulic Anchor Drilling Rig Machine

    1.full hydraulic control, instrument display, shaving convenient and flexible, greatly improving the efficiency and meet the needs of customers.
    2 gripper can be broken from the lake bolt and casing, reducing the labor intensity of workers, poles demolition...

  • ZTQ100 Pneumatic Crawler Drill

    ZTQ100 Pneumatic Crawler Drill

    Description of ZTQ100 pneumatic crawler drill: 1 low-speed high-torque hydraulic motor drive rotary device output torque required for drilling operations. 2 with the cylinder to promote, so that more stable propulsion, failure rate than the motor propulsion significantly...

  • YT28 Pushing Leg Rock Drill

    YT28 Pushing Leg Rock Drill

    Main View of pushing leg rock drill:
    1 with gas and water linkage, fast return air legs, air pressure and other institutions.
    2 control handle centralized and handle body, the new structure, easy to operate
    3 compared with the same type of rock drill: light...

  • MQT-130Hand Held Pneumatic Anchor Rock Drill

    MQT-130Hand Held Pneumatic Anchor Rock Drill

    Application of Hand Held Pneumatic anchor Rock Drill:
    Mainly used for mine, building, tunnel, coal seam, soft rock drilling etc.

First Prev 1234 Next Last 1/4
with over 20 years experience, we're professional as one of leading DTH drill manufacturers and suppliers in China. Welcome to buy or wholesale cheap DTH drill from our factory, and enjoy low price with us.