Contact Us

  • Address: No.27,Beichen Village Industrial Park,Weiyang District,Shaanxi Province

  • Phone: +86 13279217918

  • Fax: +8602962322708

  • Mail: zhongtuoks@foxmail.com

Ultra-large Rock Splitters|ultra-large Rock Splitters for A Large Area of Rock Split Construction Hoisting Machine

1 airborne division force is huge, 3500-5800 tons
2 has the advantages of simple structure, convenient operation, high work efficiency
3 low cost, safety, energy saving, a series of advantages of energy saving management.
To improve the service quality of customer service, enhance customer satisfaction

InquiryChat Now

  • Product Details

Ultra-large rock splitters|ultra-large rock splitters For a large area of rock split construction hoisting machine

Product description:

Ultra-large rock splitters are airborne, need to drill a excavator one. Can drive by pressure. Excavator hydraulic splitter airborne, clean surface and rock between roadbed stonework and rock soil for excavator, make a volley of rock surface increased by drilling equipment, large air compressor selection volley larger the direction or position of the layer rock drilling, drilling in the same section of drill hole porous, distance 1.5-2.5 meters high, the distance between the two holes in 1.5-2.5 meters. Ultra large rock splitters tools Crack width of 4-6 cm.

ultra-large rock splittersultra-large rock splitters For a large area of rock split construction hoisting machine.png

Usage:

Ultra  wedge rock Splitterused in large volume of rock, steep terrain, mountain slope in the upper surface of the dangerous rock, Boulder, and foot from the villagers living area, and high voltage line tower is short, less than the general rock blasting (shallow hole blasting) the minimum distance of 300 meters of the construction project, the construction is very difficult. The lump ore (metals, non-metallic minerals) of the first and two mountain rock disintegration, Ultra Large Rock Splitter collapse, rock quarry mining, large concrete structures and the demolition of all local jobs and other areas.

ultra large rock splitters tools.png        blob.png

Product parameters:

Technical parameters of airborne split machine

model

Split block length

mm

drilling depth

m

nominl workig pressure MPa

disruptive forceT

crack width

Opposite hole form

 

Machine weight

KG

ZT220-P90

800-900

1300mm

24-25

3300-

3600

25-

30

The chain of manual hole

600

ZT260-P100

950-1000

1700mm

24-25

4400-

5200

30-25

The chain of manual hole

650

ZTN50-P100

1000-1200

2100mm

24-25

6000

30-25

The chain of manual hole

730

 

Airborne splitting machine in use Note:

For your better use of our ultra large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:

1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.

(Hole depth requirements: splitter front end of the block length + 900mm or more, for example: split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)

2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.

3. Do not use the splitter gun as a crowbar to use!


China Ultra Large Rock Splitter factory.jpg      ultra large rock splitter

ultra-large rock splitters quotation.jpg      5.png


  • Feedback