Contact Us

  • Address: No.27,Beichen Village Industrial Park,Weiyang District,Shaanxi Province

  • Phone: +86 13279217918

  • Fax: +8602962322708

  • Mail: zhongtuoks@foxmail.com

Riding Trowel Machine|A Gasoline Powered Car Type Cement Troweling Machine for Cement Ground

1 for the concrete floor of the pulp, compaction, smoothing, wiping.
2 gearbox large modulus design, aluminum box, maintenance-free, long service life;
3 low center of gravity design, the machine running smoothly and flexible;
4 pursuit of perfection, the pursuit of excellence, the implementation of lean production.

Inquiry

  • Product Details

Riding Trowel Machine|A gasoline powered car type cement troweling machine for cement ground

Product description:

Riding Trowel Machine/ is equipped with two walking wheels to facilitate you to move in the short distance, the machine net weight 330Kg, so heavy machine we can not help a person moving the case of moving the machine, just push the trolley can move The effort. The machine has a double disc, two blades, the construction is significantly higher than other power trowel machine. /Can be installed two discs for pulp, stable operation.

Products use:

whiteman power trowel /for the size of the construction site, widely used in cement pavement pulp, smooth, trowel. Can also be used for plant, warehouse, square road maintenance, concrete surface construction.

Riding Trowel MachineZHONGTUO.png

Product parameters:

 

Model

FMZ-S36

Working  


power

24hp/3600rpm

Mode   of operation

driving

fuel   tank capacity

20L

Working   width

75in.

Lubricant   quantity

1.8L

Working   speed

0-135rpm

Fuel   consumption

313g/kWh

spatula


Size


Number   of spatula

8

total   length

1940mm

Spatula   size

350x150mm

total   width

990mm

Fixed   pitch

4.75   in

in   total height

1050mm

Model   HONDA


Weight

1950x1010x1070mm

Model

HONDA,GX630

Weight


Type

gasoline   engine, air-cooled 4-stroke

working   weight

300kg

Maximum   working weight

380kg

 Operating methods

1. If the user is not going to stop the car, please need to be too small - when the engine is running, the short stop should be separated from the clutch.

2. When the slope is parked: the wiping machine is placed on the slope and the wedge should be inserted under the front and rear wheels.

3. Should ensure that the location of the wiping machine does not cause traffic accidents

4. Trowning machine drag and drop is generally not more than 200m

5. The whiteman power trowel/ should be carried out when the static hydraulic device is located in the disengaged state, grinding machine, that is, in the static pressure device below the small button into the pump body, gasoline car Riding Trowel Machine, and drag the speed should not Higher than 3km / h.

Second appropriate manipulation

Whether it is uphill or downhill rolling construction fence production, trowel drive wheel should be in the back. This has the following benefits: Uphill, the airport cement road grinder, behind the drive wheel can withstand the ramps and the machine itself to provide the driving force, while the front wheel on the road for the initial compaction to bear the drive wheel produced Of the larger shear force; downhill when the impact of the self-weight of the tarpaulin is driven by the brake wheel to offset, only by the front wheel after the mixture is supported after the drive wheel to produce shear The ability of power.

 power trowel machine for sales.jpgChina power trowel machine factory.jpg China Riding Trowel Machine manufacturers .jpgRiding Trowel Machine quotation.jpgRelated Products:

Concrete floor grinder                   Scarifying machine  

Electric concrete scabbler            Hand held scabbler

 

 

Related Products
  • Feedback