Contact Us

  • Address: No.27,Beichen Village Industrial Park,Weiyang District,Shaanxi Province

  • Phone: +86 13279217918

  • Fax: +8602962322708

  • Mail:zhongtuoks@foxmail.com

Automatic Rebar Bending Machine

  • Upset Forging Machine|used In Rebar Bending

    Upset Forging Machine|used In Rebar Bending

    The Upset Forging Process
    Upset Forging is accomplished by holding pre-heated material between grooved dies, commonly known as ‘grip dies’.
    Pressure is then applied to the end of the bar in the direction of its axis.
    The Heading Tool upsets the end of the bar...

  • Radii And Spiral Bending Machine

    Radii And Spiral Bending Machine

    1.Fast: 20-40 meters per minute, accurate: round error ± 0.50MM.
    2 Key parts of the use of imported devices to ensure that the machine's life, the use of encoder meter meter error is very small, accurate positioning.
    3 The machine has a smooth, fast and accurate...

  • Rebar Threading Machine For Cutting And Rolling

    Rebar Threading Machine For Cutting And Rolling

    Advantages of rebar threading machine:
    1. HGS-40 rib peeling and thread rolling machine is compact in structure, stable in operation, and has an automatic opening and closing mechanism for rib peeling. Cycle time is only 30 seconds to finish a threaded end.
    2....

  • Rebar Cold Extrusion Machine With Press Connecting

    Rebar Cold Extrusion Machine With Press Connecting

    Features and details of rebar cold extrusion press connecting machine:
    strong intensity connector, stable and reliable;no specific requirements on the weld ability of the rebar.
    only needs 1-3m to stamp each connector, which is about ten times faster than ordinary...

  • Automatic Rebar Spiral-hoops Bending Machine

    Automatic Rebar Spiral-hoops Bending Machine

    Introduction of Automatic rebar spiral bending machine:
    It can process reinforcement steel bar to perform spirals or hoops with minimum diameter 140mm and maximum diameter without limit.
    it is manufactured with electric motor, gearbox with gears and pinions in...

  • Rebar Straight Thread Rolling Machine

    Rebar Straight Thread Rolling Machine

    There are three thread rolling dies on these models thread rolling machines, which are designed for making thread on pipe fittings, oil tube parts and other hollow parts, but only for metal material, knurling can also be realized.
    Advantages of rebar straight thread...

  • YDC-40U Rebar Cold Forging Machine

    YDC-40U Rebar Cold Forging Machine

    features of upseting rebar coupler forging machine
    1. Original design
    2. More convenient to move
    3. High productivity
    4. Stable to work
    5. High cutting speed
    6. Safe to operate
    7. Low noise
    8. Easy to maintain

  • GJW-20 Character Of Reinforcing Steel Bar Making Machinery

    GJW-20 Character Of Reinforcing Steel Bar Making Machinery

    1. Compact structure.
    2. Coppery motor.
    3. Good steel work disk.
    4. Easy to operate.
    5. Safe and reliable to use.
    6. Stable performance.
    7. Heavy-duty gearbox.
    8. High working efficiency.
    9. Strong rigidity and...

  • JYJ-32/40 Rebar Cold Extrusion Press Connecting Machine

    JYJ-32/40 Rebar Cold Extrusion Press Connecting Machine

    Rebar Cold extrusion press connecting machine can process rebar diameter from 16 to 40mm and thecoupler can link the rebar from 16 to 40mm.
    Principles: using the machine to press connection point to link the two rebar

  • YGW Series Rebar Spiral-hoops Benders

    YGW Series Rebar Spiral-hoops Benders

    All kinds of spiral, ring, circle and half circle bending operations can be conducted. The steps of the circles in spiral bending can be adjusted as required. Spiral bending machines are preferred especially for circular bending operations of bored pile works in bridge and...

  • Spirals-hoops Bar Bending Machines

    Spirals-hoops Bar Bending Machines

    . Compact structure, and easy to operate. 2. Use special thicker steel plate, high rigidity disk of iron, and motor with high quality, which guarantee a more stable performance. 3. It guarantees a longer life with the eccentric bushing, ultra-high hardened accessories and...

  • DBG-40C Rebar Thread Rolling Machine With Processing Diameter Ф16-Ф40mm

    DBG-40C Rebar Thread Rolling Machine With Processing Diameter Ф16-Ф40mm

    1. Easy to operate. Automatic opening-closing mechanism for rib peeling device, need only 30 seconds to finish a threaded end.
    2.can be completed once the stripping stripping, rolling thread processing
    3. Peel ribs and roll threads by the same machine, so could...

First Prev 1234 Next Last 1/4
with over 20 years experience, we're professional as one of leading automatic rebar bending machine manufacturers and suppliers in China. Welcome to buy or wholesale cheap automatic rebar bending machine from our factory, and enjoy low price with us.